You are here: Home Products By Brands

Products

By Brands

  • Filter
  • Search
  Name SKU Description Category
41
GW INSTEK GFG-8015G Features *Frequency Range : 0.2Hz ~ 2MHz *Waveform : Sine, Triangle, Square, TTL Pulse *Variable DC Offset Control *Output Overload Protection *VCF Input Function *1000 : 1 Tuning Range Analog Function Generators
GW INSTEK GFG-8020H Features *Frequency Range : 0.2Hz ~ 2MHz *Coarse and Fine Tuning *Waveform : Sine, Triangle, Square, TTL Pulse *CMOS Output *Built-In 4 Digits Counter (INT Only) *Large 0.5" LED Display *Variable DC Offset Control *Output Overload Protection *VCF Input Function Analog Function Generators
39
GW INSTEK GFG-8200A Series Features *Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)*Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)*Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output*External Voltage Controlled Frequency (VCF) Function *Two-Steps (-20dBx2) and Variable Attenuator *Built-In 6 Digits Counter with INT/EXT Function up to 150MHz(Except GFG-8215A)*INT/EXT AM/FM Modulation (GFG-8219A/8255A)*GCV Output for Synchronization (GFG-8219A/8255A)   Analog Function Generators
38
GW INSTEK GFG-3015 Features *Frequency Range 0.01Hz~15MHz *Maximum Frequency Resolution 10mHz *Dual Displays Indicate Frequency and Amplitude *Built-in 6 Digits Counter up to 150MHz/High Resolution *Output Waveforms Sine,Square,Triangle,Ramp,Pulse,Sweep,Gate or Burst *INT/EXT AM/FM Modulation *GCV Output for Synchronization *Output Overload Protection Analog Function Generators
43
GW INSTEK GAG-810/809 Features *Frequency from 10Hz ~ 1MHz *0.02% Low Sine Wave Distortion (GAG-810 Only)*6 Steps Output Attenuator *EXT SYNC Function Other Signal Sources
42
GW INSTEK GSG-120 Features *Freq Range 100kHz ~ 110MHz *Output Level -19 ~+99 dBu *All Operations are Controlled by Microprocessor *Memory Storage: 10 points in one block(up to 100 continuous points) *and 4 output levels *Memory Data Copy *Back Space key *Remote Control Function(Need the GRC-1201 option) *FM Stereo Modulation (GSG-122 only) Other Signal Sources
28
GAS DNA GMS 2000 Multi-channel digital controller for gas detector GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to... Digital Controller
27
GAS DNA GMS1500 4-Channel digital controller for gas detector GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can... Digital Controller
26
GAS DNA GMS1000 Single -Channel digital controller for gas detector GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... Digital Controller
1
GW INSTEK PCS-1000 Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB Precision Current Shunt Meter
3
GW INSTEK AC power supply APS-1102 Features : AC power supply(Power Supplies5.7”large LCD displayVarious output modes and measurement functionsAC-superimposed DC outputCapacitor input load supportedSequence functionLimiter function30 Sets of SAVE / RECALL memoriesUSB(USBTMC)standard for remote controlOutput On/Off FunctionAC power supply   Programmable AC / DC Power Source
2
GW INSTEK APS-1102A Features : - 5.7" Large LCD Display- Output Capacity: 1kVA(for AC 200V Input)- Output Modes: AC and AC+DC Combined with any of four signal sources- Signal Source: Internal(INT),External(EXT),Internal+Externl(ADD)and Sychronization(SYNC)- Arbitrary Waveform Power Output- Power Amplifier of External Signal- Measurement Functions: Voltage, Current, Power ,Frequency, PowerFactor,CF,and Harmonic Current- Capacitor Input Load Supported- Sequence Function Allows Programming of Output Patterns-... Programmable AC / DC Power Source
5
GW INSTEK PEL-2000 Series Features: -Sequence function to do high Efficient load simulations-Flexible configuration with mainframes and plug-in modules-Multiple independent load inputs up to 8 channels in a mainframe-Parallel connection of inputs for increased load capacity-Parallel connection of inputs for static and dynamic tests-Multiple channels run for dynamic tests under one clock control -Maximum rated power for low range high resolution CC tests-Von setting and Von on/off for start-up Von tests-Program mode to... Programmable DC Electronic Load
4
GW INSTEK PEL-3000 Series Features : -Operating voltage (DC)：1.5V~150V-Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV -Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)-Support of High Slew Rate：Max 16A/us-Run Program Function（GO/NO GO Test）-Sequence Function for High Efficient Load Simulations-Commands are compatible with Kikusui PLZ-4W model.-Dynamic(Switching) Function：0.0166Hz ~20kHz-Soft Start Function：Off / On(1~200ms, Res：1ms)-Adjustable OCP / OVP / OPP / UVP Setting... Programmable DC Electronic Load
13
GW INSTEK GPD-Series Features: 2/3/4 Independent Isolated Output4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)100mV/10mA(GPD-3303D)Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard InterfacePC Software & USB Driver Labview driver Programmable Linear D.C. Power Supply
12
GW INSTEK PSM Series Features: Single Output Dual Range Max. 200WHigh resolution: 1mV/1mA0.01% load/line regulation, 350uVrms rippleAuto step runing with timer setting and 100 Sets memorySafety design: OVP,OCP & OTP;Output ON/OFF controlSelf-test and software calibrationHighly visible vacuum-fluorescent displayFront and rear output terminalStandard interface : RS-232C, GPIBOption : European Jack Type Terminal   Programmable Linear D.C. Power Supply
11
GW INSTEK PSS Series Features: Digitized Programmable Interface High Resolution 10mV, 1mA High Stability, Low Drift Over-Voltage, Over-Current, Over Temperature Protection Intelligent Fan Control (Changes by Output Power) Built-in Buzzer Alarm Labview Driver Standard Interface: RS-232C Optional Interface: GPIB (IEEE-488.2) Optional European Jack Type Terminal Programmable Linear D.C. Power Supply
10
GW INSTEK PST Series Features:Digitized programmable interfacehigh resolution 10mV, 1mA 192 x 128 LCD display, simultaneously Over-voltage, over-current, over temperature protection Intelligent fan control (changes by output power) 100 Sets memory Auto step running with timer Provided auto series and parallel function Labview driver Standard interface: RS-232C Optional: GPIB (IEEE-488.2) Optional European jack type terminal Programmable Linear D.C. Power Supply
9
GW INSTEK PPT Series Features: Easy operation with UP/DOWN key High Resolution: 10mV, 1mA Over voltage protection, over current protection by hardware 50 Sets memory Self test and software calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Timer Setting FRONT/REAR Output and Sense Switch Selectable Triple Output Auto Series and Parallel Operation Auto Tracking IEEE-488.2 and SCPI Compatible Command set Labview Driver Software Available High Stability, Low Drift 4 Digit Display Programmable Linear D.C. Power Supply
8
GW INSTEK PPH-1503 Features: -Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)-3.5 Inch TFT LCD Display-Constant Voltage and Constant Current Operation-Built-in DVM Measurement Function-High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)-EXternal Relay Control Output On/Off-Sink Current Capability (Maximum:2A)-Digital Panel Control-Selectable Output and Input (DVM) Ports From Front or Rear Panel-Key Lock Function-5 Sets of Preset Memory Including Power Output ON/OFF States-High Speed... Programmable Linear D.C. Power Supply