|
|
TES-3600 3P4W POWER ANALYZER
|
|
10 Display Easy - to - View LCD Screen.
Connectors for 4 Current Sensing Clamps.
1P2W, 1P3W, 3P3W2M & 3P4W Power Measurement.
True RMS Sensing.
Power KW, KVAR, KVA, PF, θ ,Hz, & Energy KWh, KVARh & KVAh Measurement.
Phase sequency indicator function.
Backlight display function.
Manual Data Memory and Read (99 sets).
Data Logging (504KB Memory, 20,000 sets)
Programmable Trigger - Points and Start / Stop Time.
RS-232 Optical Interface with three phase voltage / current... |
3 Phase Power Analyzer
|
|
|
|
TES-6830+6801 Power and Harmonics Analyzer (100A) TES-6830+6802 Power and Harmonics Analyzer (1000A) TES-6830+3007 Power and Harmonics Analyzer ( 3000A)
|
|
Analysis for 3P4W, 3P3W, 1P2W, 1P3W
True RMS Value (V 123 and L 123 )
Active Power (W, KW, MW, GW)
Apparent and Reactive Power (KVA, KVAR)
Power Factor (PF), Phase Angle (Φ)
Energy (WH, KWH, KVARH, PFH)
Current Measurement from 0.1mA to 3000A, Capable of Analyzing IT Standby Power Consumption to the Maximum Demand of a Factory
Display of 35 Parameters in One Screen(3P4W)
Programmable CT (1 to 600) and PT (1 to 3000) Ratios
Display of Overlapped Voltage and Current Waveform
2.4M... |
3 Phase Power Analyzer
|
|
|
|
Model 21/23 Power Harmonics and Leakage Tester Model 19 Harmonics and Leakage Tester
|
|
MODEL PROVA 19, 21, 23
True RMS value (V and A)
Leakage Current Measurement at 10 μ A Resolution
Harmonic Analysis (V and A) to the 99 th Order
Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz)
Non-interrupted Harmonic Analysis
Analysis of Total Harmonic Distortion (THD-F)
Analysis of Crest Factor (C.F.)
Fast Peak Function (33 μ s and 39 μ s)
Programmable CT Ratio (1 to 250)
Model 21(50A) and 23(100A)
W, KW, H.P.
VA, KVA, VAR, KVAR
PF, Phase Angle (... |
3 Phase Power Analyzer
|
|
|
|
PROVA-6200 Graphic Power Quality Analyzer
|
|
Analysis for Single Phase and Balanced 3 phase system
True RMS Value (V and I)
Active Power (K,KW,MW,GW)
Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR)
Power Factor (PF), Phase Angle( Φ )
Energy (WH,KWH,KVARH,PFH)
Programmable PT(1 to 3000)Ratios
Display of Overlapped Voltage and Current Waveform
Maximum Demand (MD in W,KW,MW) with programmable Period
Harmonic Analysis (V and I) to 50th Order
Display of 25 Harmonics in one screen
Optical Isolated RS-232C Interface
Smart... |
3 Phase Power Analyzer
|
|
|
|
AFLEX-3001/3002 Flexible AC Current Clamp
|
|
True RMS
3000A
Voltage Measurement (AFLEX 3002 only)
Fast Peak Function(30 μs)
MAX/MIN
Auto-Power-Off:30 minutes
Flexible probe, different from normal clamp meter, can pass through obstacles at will and wind many conducting wires simultaneously, max. diameter 170mm |
Flexible AC Current Clamp
|
|
|
|
AFLEX-3003 Flexible VA Harmonics Tester AFLEX -3005 Flexible Power Quality Tester
|
|
Power Analysis (3005)
W, KW, H.P.
VA ,KVA, VAR, KVAR
PF, Phase Angle( Φ )
Energy (WH, KWH)
Dual displays (W+PF, VA+KVAR)
Balanced 3 Φ Power Quality and Sequence
Harmonics Analysis
True RMS (V and A)
3000 A
Non-interrupted Harmonic Analysis ( V and A ) to the 50th Order in % and Magnitude
Analysis of % THD-F and C.F.
Fast Peak Function (33μs and 39μs)
Programmable PT (1 to 250 )ratios
Auto - Power - Off : 30 Minutes
|
Flexible AC Current Clamp
|
|
|
|
AFLEX-6300 Graphic Power Quality Analyzer
|
|
Display of Overlapped Voltage and Current Waveform
Maximum Demand (MD in W, KW, MW) with Programmable Period
Harmonics Analysis ( V and I ) to the 50th Order
Display of 25 Harmonics in One Screen with Waveform
Display of waveform with Peak Values (512 Samples / Period), Datalogging of 32, 64, 128 or 256 Points/Cycles
Analysis of Total Harmonics Distortion ( % THD-F )
Graphic Phasor Diagram
Programmable PT (1 to 3000) Ratios
Capture 128 Transient Events ( Time + Cycles + Faults )... |
Flexible AC Current Clamp
|
|
|
|
PROVA-300XP Portable Thermal Printer
|
|
Portable Field Printing for Certificate
Text and Graphics
Two Selectable Fonts (5*7 and 8*16)
Programmable text Header and Footer
Battery and AC Power Adaptor
RS-232C Interface (Optional RS-232C to USB Bridge)
Fixed Interval Continuous Printing(5, 30, 60, 300 seconds)
|
Printer
|
|
|
|
TES-132 Solar Power Meter (Datalogging)
|
|
4 digit LCD reading.
Wide spectral range.
Excellent long term stability.
Cosine corrected.
Automatic transmission measurements.
Select either power or transmission.
Solar energy measurement.
Current time setting function.
User calibration factor setting function.
End-mount light sensor.
Select either W/m2 or Btu / (ft2 x h) units.
Data hold/MAX/MIN/AVG modes.
Auto Data Memory function. (microSD CARD 2GB)
Manual Data Memory and Read function. (99 sets)
Auto power off... |
Solar Power Meter
|
|
|
|
PROVA 200A/210 Solar Module Analyzer
|
|
60V, 6A (PROVA 200A) 60V, 12A (PROVA 210)
I-V Curve Test for Solar Cell
Max. Voltage (Vmaxp) and Max. Current (Imaxp) at Max. Power (Pmax)
I-V Curve with cursor
Calculation of Efficiency (%)
|
Solar Power Meter
|
|
|
|
TES-1333/1333R Solar Power Meter
|
|
Wide spectral range.
Excellent long term stability.
Cosine corrected.
Automatic transmission measurements.
Select either power or transmission.
Solar energy power or transmission.
Current time setting function.
User calibration factor setting function.
End-mount light sensor.
Select either W/m2 or Btu / (ft2*h) units
Data Hold / MAX / AVG modes.
Data Memory and Read function. (99 sets.)
Auto Data memory (TES-1333)
RS232 interface to PC. (TES-1333R)
|
Solar Power Meter
|
|
|
|
PROVA 700 Milli-Ohmmeter
|
|
Best resolution 1μΩ. Accuracy 0.05%
5A (120 mΩ) max. test current.
Manual or Auto Range. (There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.)
Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement)
Programmable Hi-Lo alarm with memory of 20 data.
Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for... |
Milli-Ohmmeter
|
|
|
|
TES-133 Luminous Flux Meter
|
|
4-digit LCD reading.
Spectral Sensitivity close to CIE photopic Curve.
Auto ranging from 0.05 to 7000 lumens.
Accurate and Instant response.
Data Hold function.
Data memory and read function.
Zero function.
Ratio function.
Sort function.
Comparator function.
Best for measuring : LEDs, Small lamps, Fiber illuminators.
Auto power off function.
RS232 Interface.
Easy to use.
Adapters kit : 2/3/4/5/8/10m/m
|
Luminous Flux Meter
|
|
|
|
TES-135 Color Meter
|
|
Check the color difference between two samples.
Color difference displayed
Δ(L*,a*,b*)
Δ(E*ab,C*ab, H*ab)
Δ(Y, x, y)
Δ(X, Y, Z) or
Δ(Rs, Gs, Bs)
Color space displayed
(L*, a*, b*)
(L*, C*ab, hab)
(Y, x, y)
(X, Y, Z) or
(Rs, Gs, Bs)
Maximum, Minimum and Average function.
Tolerance function.
Auto memory (99 sets) & Read function.
RS232 interface.
|
Color Meter
|
|
|
|
Testo 405 (0560 4053) Thermal Anemometer w/ Telescopic Velocity stick
|
|
Volume flow calculation up to 99,990 m3/h
Temperature measurement
Ideal for measurements in ducts
Easily read data at any angle with rotating display
Telescopic handle to 300 mm
Cap rotates to protect sensor against moisture and dirt, 118 in long telescopic handle
|
Anemometers
|
|
|
|
Testo 410-1 (0560 4101) Vane Anemometer w/ NTC Air Thermometer
|
|
Flow velocity meter with temperature measurement
Integrated 1.5" diameter vane
Timed mean value calculation
Hold function and max./min. values
Windchill calculation for outside areas (perceived temperature)
Back lit display
Protection cap for safe storage
Including wrist strap and belt clip
|
Anemometers
|
|
|
|
Testo 410-2 (0560 4102) Vane Anemometer w/ Humidity and NTC Air Thermometer
|
|
Air humidity meter with temperature measurement
Integrated measurement with 1.5 in. vane
Timed mean value calculation
Hold function and max./min. values
Windchill calculation for outside areas (perceived temperature)
Back lit display
Protective cap for safe storage
Including wrist strap and belt clip
Air humidity measurement with long-term stable Testo humidity sensor
Incl. dewpoint calculation and wet bulb
Incl. calibration certificate
|
Anemometers
|
|
|
|
Testo 416 (0560 4160) ABS Vane Anemometer
|
|
Direct display of volume flow (CFM)
Multi-point and timed mean calculations
Max - Min values make comparisons fast and easy
"Hold" button freezes readings
Back lit display
Auto-Off function
TopSafe, the indestructible protective case (optional)
0.6 to 40 m/s measuring range
Accuracy: +/- 0.2 m/s + 1.5 percent of mv
Resolution: 0.1 m/s. -40 to 185 ° F
storage temperature -4 to 122 ° F
9V battery
80 hours of battery life
Weight 11.5 oz.
Measures 7" length by 2.5" width by 1.6"... |
Anemometers
|
|
|
|
Testo 416-KIT (400563 4161) Anemometer w/ Cabled Telescopic Vane Probe
|
|
Direct display of volume flow (CFM)
Multi-point and timed mean calculations
Max - Min values make comparisons fast and easy
"Hold" button freezes readings
Back lit display
Auto-Off function
TopSafe, the indestructable protective case (optional)
|
Anemometers
|
|
|
|
Testo 417 (0560 4170) Vane Anemometer w/ built-in vane
|
|
Real-time or average CFM, velocity, temperature
True velocity measurement - no air density correction required
Simple one hand operation
Easy to carry and operate
Adjustable A(K) factor (open area of grille)
Built-in 3.93" diameter vane.
-40 to 185° F storage temperature
32 to 122° F operating temperature
9V battery. 50 hours of battery life
Weight 8 oz.
Measures 11" length by 4" width by 1.8" height
ABS housing material. Probe type NTC. 32 to 122° F measuring range
Accuracy:... |
Anemometers
|
|